Subaru Legacy: For AT models - All-Wheel Drive warning light (AT and CVT models) - Warning and indicator lights - Instruments and controls - Subaru Legacy Owners ManualSubaru Legacy: For AT models

This light flashes if the vehicle is driven with tires of different diameters fitted on its wheels or with the air pressure excessively low in any of its tires.

    All-Wheel Drive warning light (AT and CVT models)
    WARNING Continued driving with the AWD warning light flashing can lead to powertrain damage. If the AWD warning light flashes, promptly park in a safe place then check whether all four tires ar ...

    For CVT models
    This light illuminates when All-Wheel Drive is disengaged and the drive mechanism is switched to Front Wheel Drive for maintenance or similar purposes. This light flashes if the vehicle is driven ...

    See also:

    Replacing fuses
    There are relay/fuse boxes located in the engine compartment, the passenger compartment, and the trunk. If an electrical component fails to function, this may be due to a blown fuse. The easiest ...

    Compass calibration
    1. If a “C” is displayed in the compass window, the compass needs to be calibrated. 2. Drive the vehicle in a circle at 5 mph (8 km/h) or less until the display reads a direction. 3. You can a ...

    Recommended cold tire inflation pressures
    All tire pressures (including the spare) should be checked when the tires are cold. “Cold Tires” means the vehicle has not been driven for at least three hours or driven less than one mile (1. ...