Ford Fusion: Fuel quality - Diesel - Fuel and refuelling - Ford Fusion Owners manualFord Fusion: Fuel quality - Diesel

Note: We recommend that you use onlyhigh quality fuel without additives or otherengine treatments.

WARNING:

Do not mix diesel with oil, petrol orother liquids. This could cause achemical reaction.

CAUTION:

Do not add kerosene, paraffin orpetrol to diesel. This could causedamage to the fuel system.

Note: We do not recommend theprolonged use of additives intended toprevent fuel waxing.

Use diesel that meets the specificationdefined by EN 590, or equivalent.

You can use diesel that contains up to 5%RME (bio diesel).

    Fuel quality - Petrol
    Note: We recommend that you use onlyhigh quality fuel without additives or otherengine treatments. CAUTION: Do not use leaded petrol or petrolwith additives containing othermetallic compounds (e.g. ...

    Catalytic converter
    Driving with a catalyticconverter CAUTIONS: Avoid running out of fuel. Do not crank the engine for longperiods. Do not run the engine when a sparkplug lead is disconnected. Do not push-start or t ...

    See also:

    Parts and accessories
    Now you can be sure that yourFord parts are Ford parts Your Ford has been built to the higheststandards using high quality Ford OriginalParts. As a result, you can enjoy driving itfor many years. Sh ...

    If the engine will not start
    If the engine will not start even though correct starting procedures are being followed, consider each of the following points: ■ The engine will not start even though the starter motor o ...

    EPB Release
    To release the EPB, place the ignition in the ON/RUN position, apply and hold the brake pedal, and push down momentarily on the EPB switch. If you attempt to release the EPB without the brak ...