Chrysler 200: General Information - Sentry Key - Things to know before starting your vehicle - Chrysler 200 Owners ManualChrysler 200: General Information

The Sentry Key system complies with FCC rules part 15 and with RSS-210 of Industry Canada. Operation is subject to the following conditions:
• This device may not cause harmful interference.
• This device must accept any interference that may be received, including interference that may cause undesired operation.

    Customer Key Programming
    You can program new keys to the system if you have two valid Sentry Keys by performing the following procedure: 1. Cut the additional Sentry Key Transponder blank(s) to match the ignition switch ...

    Vehicle Security Alarm — If Equipped
    The Vehicle Security Alarm monitors the doors and trunk for unauthorized entry and ignition switch for unauthorized operation. While the Vehicle Security Alarm is armed, interior switches for do ...

    See also:

    Key number
    1) Key number plate 2) Security ID plate The key number is stamped on the key number plate attached to the key set. Write down the key number and keep it in another safe place, not in the vehicle ...

    Tire Pressure Monitoring System (TPMS)
    This vehicle is equipped with the Tire Pressure Monitoring System (TPMS). It monitors tire pressure of all tires except the spare. When the low tire pressure warning light is lit, one or more of y ...

    Starting a petrol engine
    Note: You can only operate the starterfor a maximum of 30 seconds at a time. Cold or hot engine All vehicles CAUTION: When the temperature is below-20ºC (-4ºF), switch the ignition onfor ...