Subaru Legacy: Hazard warning flasher
The hazard warning flasher is used to warn other drivers when you have to park your vehicle under emergency conditions. The hazard warning flasher works with the ignition switch in any position.
To turn on the hazard warning flasher, press the hazard warning button on the instrument panel. To turn off the flasher, press the button again.
NOTE
When the hazard warning flasher is on, the turn signals do not work.
Ignition switch light
For easy access to the ignition switch in the dark, the ignition switch light illuminates when driver’s door is opened or when the driver’s door is unlocked using the remote keyless entry tran ...Meters and gauges
NOTE Liquid crystal displays are used in some of the meters and gauges in the combination meter. You will find their indications hard to see if you wear polarized glasses. ...See also:
Trailer lights
CAUTION
When splicing into the vehicle electrical
system, a commercially available powertype
module/converter must be used to
provide power for all trailer lighting. This
unit uses the vehicle ba ...
Headlamp levelling
Headlamp levelling
You can adjust the level of the headlampbeams according to the vehicle load.
Recommended headlamp levelling switch positions
1 See Weights. ...
Tire designations
Federal law mandates that tire manufacturers place standardized information on
the sidewall of all tires (see the illustration).
The following information is listed on the tire sidewall:
The tire ...