Volvo S60: High/low beam headlights
Continuous high beams
1. Set the ignition to mode II.
2. With the light switch in position 0 or , pull the turn signal lever toward the steering wheel to position 2 to toggle between high and low beams (this also applies on models equipped with the optional Active Bending Lights). > The symbol illuminates in the instrument panel to indicate that the high beams are on.
Low beams
When the engine is started, the low beams are activated automatically (daytime running lights) if the headlight control is in position 0 or .
Daytime running lights can be deactivated in the MY CAR menu system under Settings - Car settings - Light settings - Daytime running lights.
However, please be aware that these lights may not be deactivated in Canada.
NOTE
- The use of daytime running lights is mandatory in Canada.
- Continuous high beams cannot be activated when the headlight switch is in position . High beam flash will function in this position.
High/low beam headlights
Headlight switch and lever 1 - High beam flash 2 - Toggle between high and low beams High beam flash Move the lever toward the steering wheel to position 1. The high beams come on until the ...Active Bending Lights (ABL)*
Headlight pattern with the Active Bending Light function deactivated (left) and activated (right) When this function is activated, the headlight beams adjust laterally to help light up a curve ...See also:
Tow-starting
Automatic transmission
Do not tow-start the vehicle.
Due to the automatic transmission, the engine
cannot be started by tow-starting.
Have the cause of the starting difficulties remedied.
Manual ...
NISSAN Intelligent Key™ battery discharge
If the battery of the Intelligent Key is almost discharged,
the guide light A of the Intelligent Key
port blinks and the indicator appears on the vehicle
information display. See “Vehicle infor ...
Pair (Link) Uconnect™ Phone To A Mobile Phone
To begin using your Uconnect™ Phone, you must pair
your compatible Bluetooth enabled mobile phone.
To complete the pairing process, you will need to reference
your mobile phone Owner’s Manual ...