Ford Fusion: Hints on driving with ABS - Brakes - Ford Fusion Owners manualFord Fusion: Hints on driving with ABS

When the ABS is operating, the brakepedal will pulse. This is normal. Maintainpressure on the brake pedal.

The ABS will not eliminate the dangersinherent when:

• you drive too close to the vehicle infront of you.

• the vehicle is aquaplaning.

• you take corners too fast.

• the road surface is poor.

    Principle of operation
    Disc brakes Wet brake discs result in reduced brakingefficiency. Dab the brake pedal whendriving from a car wash to remove the filmof water. ABS WARNING: The ABS does not relieve you ofyour respon ...

    Parking brake
    Applying the parking brake WARNING: Make sure that the parking brake isapplied before you release the lever. Note: Do not press the release buttonwhen you apply the parking brake. 1. Press the bra ...

    See also:

    With Tip Start
    If the engine fails to start after you have followed the “Normal Starting” or “Extreme Cold Weather” procedures, it may be flooded. To clear any excess fuel, push the accelerator pedal a ...

    Towing load/specification
    *1: The towing capacity values are calculated assuming a base vehicle with driver and any options required to achieve the rating. Additional passengers, cargo and/or optional equipment will add ...

    Traction Off Light
    This light comes on briefly while starting the engine. If it does not, have the vehicle serviced by your dealer. This light comes on when the Traction Control System (TCS) has been turned ...