BMW 5 Series: Indication of a flat tire - FTM Flat Tire Monitor - Safety - Controls - BMW 5 Series Owners ManualsBMW 5 Series: Indication of a flat tire

up. A The yellow warning lamp lights up. A Check Control message is displayed.

There is a flat tire or a major loss in tire inflation pressure.

1. Reduce your speed and stop cautiously.
Avoid sudden braking and steering maneuvers.
2. Check whether the vehicle is fitted with regular tires or run-flat tires.
Run-flat tires, are labeled with a circular symbol containing the letters RSC marked on the tire sidewall.

tires Do not continue driving without run-flat tires
Do not continue driving if the vehicle is not equipped with run-flat tires; continued driving may result in serious accidents.◀

When a flat tire is indicated, DSC Dynamic Stability Control is switched on if necessary.

    Initialization
    The initialization process adopts the set inflation tire pressures as reference values for the detection of a flat tire. Initialization is started by confirming the inflation pressures. Do not ...

    Actions in the event of a flat tire
    Normal tires 1. Identify the damaged tire Do this by checking the air pressure in all four tires. If the tire inflation pressure in all four tires is correct, the Flat Tire Monitor may not have ...

    See also:

    Fuel
    Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equipment is also described that is not avai ...

    Folder selection
    Press the “” side of the “FOLDER” button briefly to select the next folder. Press the “” side of the button briefly to go back to the previous folder. NOTE ● Selecting folde ...

    Removal and Installation of the Sealant Canister
    To remove the sealant canister: 1. Remove the plastic cover. 2. Unscrew the connector (B) from the canister (A). 3. Pull up on the canister (A) to remove it. 4. Replace with a new canister ...