BMW 5 Series: Indicator/warning lamps - DSC Dynamic Stability 
Control - Driving stability control systems - Controls - BMW 5 Series Owners ManualsBMW 5 Series: Indicator/warning lamps

controls The indicator lamp flashes: DSC controls the drive forces and brake forces.

The indicator lamp lights up: DSC has failed.

    The concept
    DSC prevents traction loss in the driving wheels when driving away and accelerating. DSC also recognizes unstable vehicle conditions, such as fishtailing or nose-diving. Subject to physical lim ...

    Deactivating DSC: DSC OFF
    When DSC is deactivated, driving stability is reduced during acceleration and when driving in bends. Stabilizing interventions by the Integral Active Steering system are only performed by the r ...

    See also:

    If You Cannot See the HUD Image When the Ignition Is On
    • Is anything covering the HUD lens? • Is the HUD dimmer setting bright enough? • Is the HUD image adjusted to the proper height? • Are you wearing polarized sunglasses? • Still ...

    Heater operation
    Heating This mode is used to direct heated air to the foot outlets. Some air also flows from the defrost outlets and the side vent outlets. 1. Press the button to the OFF position for normal h ...

    Loose Filler Cap Message
    If the vehicles diagnostic system determines that the fuel filler cap in loose, improperly installed, or damaged, a “gASCAP” message will be displayed in the instrument cluster. Tighten the ...