Toyota Camry: Instructions for checking tire inflation pressure - Tire inflation pressure - Do-it-yourself maintenance - Maintenance and care - Toyota Camry Owners ManualToyota Camry: Instructions for checking tire inflation pressure

When checking tire inflation pressure, observe the following:

●Check only when the tires are cold.

If your vehicle has been parked for at least 3 hours or has not been driven for more than 1 mile or 1.5 km, you will get an accurate cold tire inflation pressure reading.

●Always use a tire pressure gauge.

The appearance of the tire can be misleading. In addition, tire inflation pressure that is even just a few pounds off can affect ride quality and handling.

●Do not reduce tire inflation pressure after driving. It is normal for tire inflation pressure to be higher after driving.

●Never exceed the vehicle capacity weight.

Passengers and luggage weight should be placed so that the vehicle is balanced.

CAUTION
■Proper inflation is critical to save tire performance
Keep your tires properly inflated. Otherwise, the following conditions may occur and result in an accident causing death or serious injury:
●Excessive wear
●Uneven wear
●Poor handling
●Possibility of blowouts resulting from overheated tires
●Poor sealing of the tire bead
●Wheel deformation and/or tire separation
●A greater possibility of tire damage from road hazards

NOTICE
■When inspecting and adjusting tire inflation pressure
Be sure to put the tire valve caps back on.
Without the valve caps, dirt or moisture could get into the valve and cause air leakage, which could result in an accident. If the caps are lost, replace them as soon as possible.

    Effects of incorrect tire inflation pressure
    Driving with incorrect tire inflation pressure may result in the following: ●Reduced fuel efficiency ●Reduced driving comfort and tire life ●Reduced safety ●Damage to the d ...

    Wheels
    If a wheel is bent, cracked or heavily corroded, it should be replaced. Otherwise, the tire may separate from the wheel or cause a loss of handling control. ...

    See also:

    Operating HomeLink®
    Press the appropriate HomeLink® button. The HomeLink® indicator light should come on. The HomeLink® compatible transceiver in your vehicle continues to send a signal for up to 20 seconds as lo ...

    Operating UHP Using Voice Control
    The voice control of the UHP system enables you to operate several functions of the mobile phone using your voice. The UHP system uses voice commands to control the system and dial phone n ...

    Before programming
    ●Install a new battery in the remote control transmitter. ●The battery side of the remote control transmitter must be pointed away from the HomeLink® button. ...