Nissan Altima: License plate bracket padding
1. License plate
2. Trunk
3. License plate frame
4. Padding
CAUTION
A license plate frame could vibrate and cause noise or paint damage. To avoid damage or noise, add a soft adhesive pad with a maximum thickness of 4 mm to the back lower edge of the license plate frame.
To protect your vehicle from corrosion
● Wash and wax your vehicle often to keep the vehicle clean. ● Always check for minor damage to the paint and repair it as soon as possible. ● Keep drain holes at the bottom of t ...See also:
Two separate circuits
Your vehicle has a dual circuit brake system. Each circuit works diagonally across
the vehicle. If one circuit of the brake system should fail, the other half of the
system still works. If one cir ...
Additional Factors Affecting
System Operation
Safety belts help keep the
passenger in position on the seat
during vehicle maneuvers and
braking, which helps the passenger
sensing system maintain the
passenger airbag status. See
“Saf ...
Hitches
Use the correct hitch equipment.
See your dealer or a hitch dealer for
assistance.
• The rear bumper on the vehicle
is not intended for hitches. Do
not attach rental hitches or other
bumpe ...