Ford Fusion: Locking and unlocking - Locks - Ford Fusion Owners manualFord Fusion: Locking and unlocking

Central locking

You can only centrally lock the doors ifthey are all closed.

Double locking

WARNINGS:

Do not activate double locking whenpersons or animals are inside thevehicle.

You will not be able to unlock thedoors from the inside if you havedouble locked them.

Double locking is a theft protection featurethat prevents someone from opening thedoors from the inside. You can onlydouble lock the doors if they are all closed.

Locking and unlockingconfirmation

When you unlock the doors, the directionindicators will flash once.

When you lock the doors, the directionindicators will flash twice.

Note: If your vehicle has double locking,the direction indicators will only flash twiceonce you have activated double locking.

Double locking the doors with the key

Locking and unlocking the doors with the keyUnlock ALock B

Double locking the doors with the key

Turn the key to the unlock position andthen the lock position within two seconds.

Locking the doors with the remotecontrol

Locking and unlocking the doors with the remote controlUnlock ALock BLuggage compartment lid unlock C

Locking the doors with the remotecontrol

Press button B once.

Double locking the doors with theremote control

Press button B twice within threeseconds.

Unlocking the luggagecompartment lid

Press button C twice within threeseconds.

Automatic relocking

The doors will relock automatically if youdo not open a door within 45 seconds ofunlocking the doors with the remotecontrol. The door locks and the alarm willreturn to their previous state.

Reprogramming the unlockingfunction

You can reprogram the unlocking functionso that only the driver's door is unlockedor all doors are unlocked. Press the lockand unlock buttons on the remote controlat the same time for four seconds withthe ignition switched off. The directionindicators will flash twice as confirmation.

    Locks
    ...

    See also:

    Mechanical key
    The Intelligent Key contains the mechanical key. To remove the mechanical key, release the lock knob on the back of the Intelligent Key. To install the mechanical key, firmly insert it into the ...

    DRIVE 3
    This range eliminates shifts into fourth gear. The transmission will operate normally in first and second gear. Shifts into third may be delayed to provide second gear operation at higher speeds. ...

    Drive belts
    Inspect all drive belts for evidence of cuts, cracks, excessive wear or oil saturation and replace if necessary. Drive belts should be checked periodically for proper tension and adjusted as neces ...