Buick Regal: Lower Anchor and Top Tether Anchor Locations - Lower Anchors and Tethers for Children (LATCH System) - Child Restraints - Seats and Restraints - Buick Regal Owners ManualBuick Regal: Lower Anchor and Top Tether Anchor Locations

(Top Tether Anchor): Rear Seat

Seating positions with top tether anchors. (Top Tether Anchor): Seating positions with top tether anchors.

(Lower Anchor): Seating positions with two lower anchors.

To assist you in locating the lower anchors, each rear anchor position has a label, near the crease between the seatback and the seat cushion.

To assist you in locating the lower anchors, each rear anchor position has a label, near the crease between the seatback and the seat cushion.

To assist you in locating the top tether anchors, the top tether anchor symbol is located on the cover.

To assist you in locating the top tether anchors, the top tether anchor symbol is located on the cover.

The top tether anchors are located under the covers, behind the rear seat, on the filler panel. Be sure to use an anchor located on the same side of the vehicle as the seating position where the child restraint will be placed.

The top tether anchors are located under the covers, behind the rear seat, on the filler panel. Be sure to use an anchor located on the same side of the vehicle as the seating position where the child restraint will be placed.

Do not secure a child restraint in a position without a top tether anchor if a national or local law requires that the top tether be attached, or if the instructions that come with the child restraint say that the top tether must be attached.

According to accident statistics, children and infants are safer when properly restrained in a child restraint system or infant restraint system secured in a rear seating position. See Where to Put the Restraint  for additional information.

    Top Tether Anchor
    A top tether (A, C) anchors the top of the child restraint to the vehicle. A top tether anchor is built into the vehicle. The top tether attachment (B) on the child restraint connects to the top te ...

    Securing a Child Restraint Designed for the LATCH System
    WARNING If a LATCH-type child restraint is not attached to anchors, the child restraint will not be able to protect the child correctly. In a crash, the child could be seriously injured or killed. ...

    See also:

    Loading tips
    ● The GVW must not exceed GVWR or GAWR as specified on the F.M.V.S.S./C.M.V.S.S. certification label. ● Do not load the front and rear axle to the GAWR. Doing so will exceed the GVWR ...

    Opening and closing the bonnet
    Opening the bonnet 1. Pull the lever. 2. Raise the bonnet slightly and pull thecatch towards you. 3. Open the bonnet and support it withthe strut. Closing the bonnet Note: Make sure that the ...

    Door control panel
    ...