BMW 5 Series: Maintaining/storing the speed - Active Cruise Control with 
Stop & Go function, ACC - Driving comfort - Controls - BMW 5 Series Owners ManualsBMW 5 Series: Maintaining/storing the speed

When the system is switched on, the Press the button.

When the system is switched on, the current speed is maintained and stored as the desired speed.

It is displayed in the speedometer and briefly displayed in the instrument cluster.

When cruise control is maintained or stored, DSC Dynamic Stability Control is switched on, if necessary.

    Switching on/off and interrupting cruise control
    Switching on Press the button on the steering wheel. The indicator lamps in the instrument cluster light up and the mark in the speedometer is set to the current speed. Cruise control can be ...

    Changing, maintaining, and storing the speed
    The rocker switch can be pressed while the system is interrupted to maintain and store the current speed. DSC Dynamic Stability Control is switched on, if necessary. Adapting the desired speed ...

    See also:

    Malfunction Indicator Lamp
    If the indicator comes on while driving, it means one of the engine’s emissions control systems may have a problem. Even though you may feel no difference in your vehicle’s performance ...

    If the SRS airbags deploy (inflate)
    ●Bruising and slight abrasions may result from contact with a deploying (inflating) SRS airbag. ●A loud noise and white powder will be emitted. ●Parts of the airbag module (steer ...

    Tail/Back-up light (Outback)
    1. Apply a flat-head screwdriver to the light cover as shown in the illustration, and pry the light cover off from the rear gate trim. 1) Back-up light 2) Tail light 2. Turn the bulb socket c ...