Buick LaCrosse: Making a Call
Calls can be made using the following commands.
Dial or Call: The dial or call command can be used interchangeably to dial a phone number or a stored name tag.
Digit Dial: This command allows a phone number to be dialed by entering the digits one at a time.
Re-dial: This command is used to dial the last number used on the cell phone.
Using the “Dial” or “Call” Command
1. Press . The system responds “Ready,” followed by a tone.
2. Say “Dial” or “Call.”.
3. Say the entire number without pausing or say the name tag.
Once connected, the person called will be heard through the audio speakers.
Using the “Digit Dial” Command
The digit dial command allows a phone number to be dialed by entering the digits one at a time.
After each digit is entered, the system repeats back the digit it heard followed by a tone.
If an unwanted number is recognized by the system, say “Clear” at any time to clear the last number.
To hear all of the numbers recognized by the system, say “Verify” at any time.
1. Press . The system responds “Ready,” followed by a tone.
2. Say “Digit Dial.”.
3. Say each digit, one at a time, that you want to dial. After each digit is entered, the system repeats back the digit it heard followed by a tone. After the last digit has been entered, say “Dial.”.
Once connected, the person called will be heard through the audio speakers.
Using the “Re-dial” Command
1. Press . The system responds “Ready,” followed by a tone.
2. After the tone, say “Re-dial.” The system dials the last number called from the connected cell phone.
Once connected, the person called will be heard through the audio speakers.
Listing Stored Numbers
The list command will list all the stored numbers and name tags. Using the “List” Command 1. Press . The system responds “Ready,” followed by a tone. 2. Say “Directory.”. 3. Say ...Receiving a Call
When an incoming call is received, the audio system mutes and a ring tone is heard in the vehicle. • Press to answer the call. • Press to ignore a call. ...See also:
Record your key number
The key code number is stamped on the bar code tag attached to the key set. Should
you lose your keys, this number will enable an authorized HYUNDAI dealer to duplicate
the keys easily. Remove the ...
Key operations
(1) Master key (M) Used to start the engine, lock and unlock the doors, lock
and unlock the glove box, and open the trunk.
(2) Sub key (S)
Used only to start the engine and lock and unlock the doo ...
Fluids
Proper fluid levels and approved
fluids protect the vehicle’s systems
and components. See
Recommended Fluids and
Lubricants for GM
approved fluids.
• Engine oil and windshield
washer ...