Buick LaCrosse: Memory Seats
Memory Seats
On vehicles with the memory feature, the “1” and “2” buttons on the outboard side of the driver seat are used to manually save and recall the driver seat and outside mirror positions. These manually stored positions are referred to as Button Memory positions.
The vehicle will also automatically save driver seat and outside mirror positions to the current driver Remote Keyless Entry (RKE) transmitter when the ignition is placed in OFF. These automatically stored positions are referred to as RKE Memory positions. See Remote Keyless Entry (RKE) System Operation for more information.
- Storing Button Memory Positions
- Recalling Button Memory Positions
- Recalling RKE Memory Positions (Memory Remote Recall)
- Easy Exit Driver Seat
Power Reclining Seatbacks
Power Reclining Seatbacks
To adjust a power seatback,
if equipped:
• Tilt the top of the control
rearward to recline.
• Tilt the top of the control forward
to raise. ...
Storing Button Memory Positions
To save positions into Button
Memory:
1. Adjust the driver seat, seatback
recliner, and both outside mirrors
to the desired driving positions.
2. Press and hold MEM (Memory)
and “1” at t ...
See also:
Starting procedure with the SmartKey
To start the engine using the SmartKey
instead of KEYLESS-GO, pull the Start/
Stop button out of the ignition lock.
•► To start a gasoline engine: turn the
SmartKey to position 3 ...
Driving on Wet Roads
Rain and wet roads can reduce
vehicle traction and affect your
ability to stop and accelerate.
Always drive slower in these types
of driving conditions and avoid
driving through large puddles ...
Audio Source
VOL/ (Volume/Power):
1. Press to turn the radio on or off.
2. Turn to increase or decrease the
volume of the active source
(i.e., current audio source, active
navigation voice guidance,
or ...