BMW 5 Series: Mounts for the lower LATCH anchors - LATCH child restraint fixing 
system - Transporting children safely - Controls - BMW 5 Series Owners ManualsBMW 5 Series: Mounts for the lower LATCH anchors

Make sure that the lower LATCH anchors have Correctly engage the lower LATCH anchors
Make sure that the lower LATCH anchors have properly engaged and that the child restraint fixing system is resting snugly against the backrest; otherwise, the degree of protection offered may be reduced.◀

Before mounting the LATCH child restraint fixing system, pull the belt away from the child restraint fixing system.

Without a through-loading system:

Position

Without a through-loading system:
Without a through-loading system:

Position

Mounts for the lower LATCH anchors are located in the gap between the seat and backrest

With a through-loading system:

Position

With a through-loading system:
With a through-loading system:

Position

Mounts for the lower LATCH anchors are located behind the indicated covers.

    Note
    Manufacturer's information for LATCH child restraint fixing systems To mount and use the LATCH child restraint fixing systems, observe the operating and safety information from the system manu ...

    Mounting LATCH child restraint fixing systems
    1. Mount the child restraint fixing system; refer to the operating instructions of the system. 2. Ensure that both LATCH anchors are properly connected. ...

    See also:

    Locking and unlocking from the outside
    To lock the driver’s door from the outside with the key, turn the key toward the rear. To unlock the door, turn the key toward the front. Pull the outside door handle to open an unlocked door. ...

    Door step light
    1. Remove the lens by prying the edge of the lens with a flat-head screwdriver. 2. Pull the bulb out of the socket. 3. Install a new bulb. 4. Reinstall the lens. ...

    Making a Call
    Calls can be made using the following commands. Dial or Call: The dial or call command can be used interchangeably to dial a phone number or a stored name tag. Digit Dial: This command allow ...