Nissan Maxima: Nissan vehicle immobilizer system
The NISSAN Vehicle Immobilizer system will not allow the engine to start without the use of the registered key.
If the engine fails to start using a registered key (for example, when interference is caused by another registered key, an automated toll road device or automatic payment device on the key ring), restart the engine using the following procedure:
1. Leave the ignition switch in the ON position for approximately 5 seconds.
2. Place the ignition switch in the OFF or LOCK position, and wait approximately 10 seconds.
3. Repeat steps 1 and 2.
4. Restart the engine while holding the device (which may have caused the interference) separate from the registered key.
If the no start condition re-occurs, NISSAN recommends placing the registered key on a separate key ring to avoid interference from other devices.
NISSAN Intelligent key battery discharge
If the battery of the Intelligent Key is almost discharged, the guide light (A)
of the Intelligent Key port blinks and the indicator appears on the vehicle information
display. See Vehicle infor ...
Before starting the engine
-Make sure the area around the vehicle is clear.
- Check fluid levels such as engine oil, coolant, brake fluid, and window washer
fluid as frequently as possible, or at least whenever you refuel.
...
See also:
Power windows
The ignition switch must be in the ON position for power windows to operate.
Each door has a power window switch that controls the door's window. The driver
has a power window lock switch which ...
Jump starting
WARNING
● Battery fluid is SULFURIC ACID. Do not let it come in contact with the eyes,
skin, clothing or the vehicle.
If battery fluid gets on you, thoroughly flush the exposed area with wat ...
General Information
This device complies with part 15 of FCC rules and with
RS-210 of Industry Canada. Operation is subject to the
following conditions:
1. This device may not cause harmful interference.
2. This de ...
