BMW 5 Series: Planning a trip with intermediate 
destinations - Destination input - Navigation - BMW 5 Series Owners ManualsBMW 5 Series: Planning a trip with intermediate destinations

New trip

A trip can be planned with several intermediate destinations.

1. "Navigation"
2. "Map"
3. Move the controller to the left if necessary.
4. 5. "Enter new destination" "Guidance"
5. "Enter new destination"
6. Select the type of destination entry.

7. Enter the intermediate destination.

7. Enter the intermediate destination.
8. "Start guidance"

Entering intermediate destinations

A maximum of 30 intermediate destinations can be entered for one trip.

1. "Enter new destination"
2. Select the type of destination entry.
3. Enter the intermediate destination.
4. "Add as another destination"
The intermediate destination is entered in the destination list and is highlighted.
5. Turn the controller until the intermediate destination is located in the desired position in the list.
6. Press the controller.

Starting the trip

1. After all intermediate destinations are entered, highlight the first destination.

If the second destination, for example, is highlighted when destination guidance is started, the first destination is skipped.
2. "Start guidance"
theThis symbol marks the active leg of the trip.

Store the trip

Up to 30 trips can be stored in the trip list. If necessary, delete existing trips to be able to store new trips.

1. "Options" Open.
2. "Store trip"
3. Enter the name.
4. "OK"

Select the stored trip

1. "Navigation"
2. "Stored trips"
3. Select a stored trip.
4. "Start guidance"

Reversing the direction of travel

Intermediate destinations are displayed in reverse order in the list.

1. "Map"
2. 3. "Options" Open. "Guidance"
3. "Options" Open.
4. "Reverse order of trip dest."

Intermediate destination options

1. "Map"
2. 3. "Display all trip destinations""Guidance"
3. "Display all trip destinations"
4. Select an intermediate destination.

▷ "Edit destination"
▷ "Reposition dest. in the trip": move an intermediate destination to another position in the list.
▷ "Delete dest. in the trip"
▷ "Go to next dest. in the trip"

Some options are not available for certain trips.

Delete the stored trip

1. "Stored trips"
2. Highlight the desired trip.
3. "Options" Open.
4. "Delete all trips" or "Delete trip"

Open the last trip

1. "Navigation"
2. "Stored trips"
3. "Last trip"
4. "Start guidance"

    Destination entry by voice
    General information ▷ Instructions for voice activation system<>. ▷ When making a destination entry by voice, you can change between voice operation and iDrive. ▷ To ha ...

    See also:

    Disabling the TRAC/VSC systems
    If the vehicle gets stuck in fresh snow or mud, the TRAC/VSC systems may reduce power from the engine to the wheels. You may need to turn the system off to enable you to rock the vehicle in order ...

    Automatic moonroof
     Automatic moonroof The moonroof will only operate when the ignition switch is placed in the ON position. The automatic moonroof is operational for about 45 seconds, even if the ignition s ...

    Using the Delete All Name Tags Command
    The delete all name tags command deletes all stored phone book name tags and route name tags for OnStar, if stored. To delete all name tags: 1. Press . ► For vehicles without a navigation sy ...