Chrysler 200: Replacement Bulbs
All the inside bulbs are brass or glass wedge base.
Aluminum base bulbs are not approved and should not be used for replacement.
LIGHT BULBS – Interior Bulb No.
Front Courtesy/Reading Lamp . . . . . . . . . . 578/W5W
Center Courtesy/Reading Lamp. . . . . . . . . . 578/W5W
Visor Vanity Lamp. . . . . . . . . . . . . . . . . . . . . . A6220
Glove Box Lamp . . . . . . . . . . . . . . . . . . . . . . . A6220
Shift Indicator Lamp . . . . . . . . . . . . . . . . . IKLE14140
Rear Compartment (Trunk) Lamp . . . . . . . . . . . . . 579
NOTE:
For lighted switches, see your authorized dealer
for replacement.
LIGHT BULBS – Exterior Bulb No.
Bi-Halogen Headlamp . . . . . . . . . . . . . . . . . . . . HIR2
Front Turn Signal Lamp. . . . . . . . . . . . . . . . 3157NAK
Front Park Lamp . . . . . . . . . . . . . . . . . . . . . . . . LED
(Serviced at Authorized Dealer)
Front Fog Lamp . . . . . . . . . . . . . . . . . . . . . . . . . H11
Center High Mounted Stop (CHMSL) Lamp . . . . . LED
(Serviced at Authorized Dealer)
Rear Tail/Stop/Turn Lamp . . . . . . . . . . . . . . . . . LED
(Serviced at Authorized Dealer)
Backup Lamp . . . . . . . . . . . . . . . . . . . . . . . . . . . 921
License Lamp. . . . . . . . . . . . . . . . . . . . . . . . . . W5W
Vehicle Storage
If you will not be using your vehicle for more than 21 days, you may want to take steps to preserve your battery. • Disengage the mini-fuse in the Power Distribution Center labeled IOD (Ignit ...Bulb Replacement
...See also:
Manual climate control system
To defog inside windshield
1. Select any fan speed except “0” position.
2. Select desired temperature.
3. Select the or
position.
4. The outside (fresh) air will be selected automatically ...
Rear seat heating
Rear seat heating
Switching on
Press the button
once for each temperature
level.
The maximum temperature is reached when
three LEDs are lit.
If the drive is continued within approx. 15 mi ...
Reducing Speed While Using
Cruise Control
If the cruise control system is
already activated:
• Move the thumbwheel toward
SET/− and hold until the desired
lower speed is reached, then
release it.
• To slow down in small am ...