Buick Regal: Replacing LATCH System Parts After a Crash - Child Restraints - Seats and Restraints - Buick Regal Owners ManualBuick Regal: Replacing LATCH System Parts After a Crash

A crash can damage the LATCH system in the vehicle. A damaged LATCH system may not properly secure the child restraint, resulting in serious injury or even death in a crash. To help make sure the LATCH system is working properly after a crash, see your dealer to have the system inspected and any necessary replacements made as soon as possible. WARNING
A crash can damage the LATCH system in the vehicle. A damaged LATCH system may not properly secure the child restraint, resulting in serious injury or even death in a crash. To help make sure the LATCH system is working properly after a crash, see your dealer to have the system inspected and any necessary replacements made as soon as possible.

If the vehicle has the LATCH system and it was being used during a crash, new LATCH system parts may be needed.

New parts and repairs may be necessary even if the LATCH system was not being used at the time of the crash.

    Head Restraint Removal and Reinstallation
    The rear outboard head restraints can be removed if they interfere with the proper installation of the child restraint. To remove the head restraint: 1. Partially fold the seatback forward. See Rear ...

    Securing Child Restraints (Rear Seat)
    When securing a child restraint in a rear seating position, study the instructions that came with the child restraint to make sure it is compatible with this vehicle. If the child restraint has the L ...

    See also:

    Charging the battery
    WARNING Never charge a battery still installed in the vehicle unless a battery charger unit approved by Mercedes-Benz is being used. Gases may escape during charging and cause explosions ...

    Removing and installing the clips
    The luggage trim cover and trunk panel cover clip Removing Installing The fender liner clip Installing CAUTION ■Replacing light bulbs ●Turn off the lights. Do not attempt ...

    Three-Way Calling
    Three-way calling must be supported on the Bluetooth phone and enabled by the wireless service carrier. 1. While on a call, press . The system responds with “Ready,” followed by a tone. 2. Say ...