Buick Regal: Replacing Safety Belt System Parts after a Crash - Safety Belts - Seats and Restraints - Buick Regal Owners ManualBuick Regal: Replacing Safety Belt System Parts after a Crash

A crash can damage the safety belt system in the vehicle. WARNING
A crash can damage the safety belt system in the vehicle.

A damaged safety belt system may not properly protect the person using it, resulting in serious injury or even death in a crash. To help make sure the safety belt systems are working properly after a crash, have them inspected and any necessary replacements made as soon as possible.

After a minor crash, replacement of safety belts may not be necessary.

But the safety belt assemblies that were used during any crash may have been stressed or damaged.

See your dealer to have the safety belt assemblies inspected or replaced.

New parts and repairs may be necessary even if the safety belt system was not being used at the time of the crash.

Have the safety belt pretensioners checked if the vehicle has been in a crash, or if the airbag readiness light stays on after you start the vehicle or while you are driving. See Airbag Readiness Light

    Safety Belt Care
    Keep belts clean and dry. WARNING Do not bleach or dye safety belts. It may severely weaken them. In a crash, they might not be able to provide adequate protection. Clean safety belts only with ...

    Airbag System
    The vehicle has the following airbags: ► A frontal airbag for the driver. ► A frontal airbag for the right front passenger. ► A seat-mounted side impact airbag for the driver. &# ...

    See also:

    Manual Rearview Mirror
    Adjust the inside rearview mirror for a clear view of the area behind your vehicle. To avoid glare of the headlamps from behind, push the tab forward for daytime and pull it for nighttime us ...

    Brake Assist
    This vehicle has a brake assist feature designed to assist the driver in stopping or decreasing vehicle speed in emergency driving conditions. This feature uses the stability system hydraulic brake co ...

    Date
    Setting the date 1. "Settings" 2. "Time/Date" 3. "Date:" 4. Turn the controller until the desired day is displayed. 5. Press the controller. 6. Make the necessary ...