Buick LaCrosse: Ride Control System Messages - Vehicle Messages - Instruments and Controls - Buick LaCrosse Owners ManualBuick LaCrosse: Ride Control System Messages

ALL WHEEL DRIVE OFF

This message displays when the All-Wheel Drive (AWD) System has been turned off. See All-Wheel Drive.

SERVICE ALL WHEEL DRIVE SYSTEM

This message displays when there is a problem with the All-Wheel Drive (AWD) System. See your dealer for service.

SERVICE REAR AXLE

This message displays when there is a problem with the All-Wheel Drive (AWD) System. See your dealer for service.

SERVICE TRACTION CONTROL

This message displays when there is a problem with the Traction Control System (TCS). When this message is displayed, the system will not limit wheel spin. Adjust your driving accordingly. See your dealer for service.

SERVICE STABILITRAK

This message displays if there is a problem with the StabiliTrak system.

If this message appears, try to reset the system. Stop; turn off the engine for at least 15 seconds; then start the engine again. If this message still comes on, it means there is a problem. See your dealer for service. The vehicle is safe to drive, however, you do not have the benefit of StabiliTrak, so reduce your speed and drive accordingly.

SPORT MODE ON

This message displays when using the selective ride control. See Selective Ride Control for more information.

TRACTION CONTROL OFF

This message displays when the Traction Control System (TCS) is turned off. Adjust your driving accordingly.

    Object Detection System Messages
    PARK ASSIST OFF This message displays when the park assist system has been turned off or when there is a temporary condition causing the system to be disabled. See Ultrasonic Parking Assist ...

    Anti-theft Alarm System Messages
    THEFT ATTEMPTED This message displays if the vehicle detects a tamper condition. ...

    See also:

    Manual drive program
    Switching on the manual drive program The manual drive program is only available for AMG vehicles. Manual drive program M is different from drive programs S and S+ with regard to spontaneity, ...

    Mounting LATCH child restraint fixing systems
    1. Mount the child restraint fixing system; refer to the operating instructions of the system. 2. Ensure that both LATCH anchors are properly connected. ...

    Removal
    Use the following procedure to remove the adjustable head restraints. 1. Pull the head restraint up to the highest position. 2. Push and hold the lock knob and release knob. 3. Remove the head ...