Buick Regal: Safety Belt Pretensioners - Lap-Shoulder Belt - Safety Belts - Seats and Restraints - Buick Regal Owners ManualBuick Regal: Safety Belt Pretensioners

This vehicle has safety belt pretensioners for front outboard occupants. Although the safety belt pretensioners cannot be seen, they are part of the safety belt assembly.

They can help tighten the safety belts during the early stages of a moderate to severe frontal, near frontal, or rear crash if the threshold conditions for pretensioner activation are met.

And, if the vehicle has side impact airbags, safety belt pretensioners can help tighten the safety belts in a side crash or a rollover event.

Pretensioners work only once. If the pretensioners activate in a crash, they will need to be replaced, and probably other new parts for the vehicle's safety belt system. See Replacing Safety Belt System Parts after a Crash .

    Shoulder Belt Height Adjuster
    The vehicle has a shoulder belt height adjuster for the driver and right front passenger seating positions. Adjust the height so the shoulder portion of the belt is on the shoulder and not falling of ...

    Rear Safety Belt Comfort Guides
    Rear safety belt comfort guides may provide added safety belt comfort for older children who have outgrown booster seats and for some adults. When installed on a shoulder belt, the comfort guide posit ...

    See also:

    Possible commands
    Most menu items on the Control Display can be voiced as commands. The available commands depend on which menu is currently displayed on the Control Display. There are short commands for function ...

    Stop the vehicle immediately.
    The following warning indicates the possibility of damage to the vehicle that may lead to an accident. Immediately stop the vehicle in a safe place and contact your Toyota dealer. ...

    Detachable trailer hitch (accessory)
    A - Ball holder B - Locking bolt C - Cotter pin D - Hitch assembly E - Safety wire attachment Installing the ball holder 1. If necessary, remove the cotter pin from the locking bolt and slid ...