Buick LaCrosse: Servicing the Airbag-Equipped Vehicle - Airbag System - Seats and Restraints - Buick LaCrosse Owners ManualBuick LaCrosse: Servicing the Airbag-Equipped Vehicle

Airbags affect how the vehicle should be serviced. There are parts of the airbag system in several places around the vehicle. Your dealer and the service manual have information about servicing the vehicle and the airbag system. To purchase a service manual, see Service Publications Ordering Information.

WARNING!
For up to 10 seconds after the vehicle is turned off and the battery is disconnected, an airbag can still inflate during improper service. You can be injured if you are close to an airbag when it inflates. Avoid yellow connectors.
They are probably part of the airbag system. Be sure to follow proper service procedures, and make sure the person performing work for you is qualified to do so.

    Additional Factors Affecting System Operation
    Safety belts help keep the passenger in position on the seat during vehicle maneuvers and braking, which helps the passenger sensing system maintain the passenger airbag status. See “Saf ...

    Adding Equipment to the Airbag-Equipped Vehicle
    Adding accessories that change the vehicle's frame, bumper system, height, front end or side sheet metal, may keep the airbag system from working properly. The operation of the airbag system ...

    See also:

    Maintenance procedures
    The pages that follow contain the required maintenanceservices determined by the engineers who designed yourvehicle. Besides those maintenance items specified in the fixedmaintenance schedule, ther ...

    Economical operation
    Your vehicle's fuel economy depends mainly on your style of driving, where you drive and when you drive. Each of these factors affects how many miles (kilometers) you can get from a gallon (l ...

    To decrease the speed (by brake pedal)
    1. Depress the brake pedal to release cruise control temporarily. 2. When the speed decreases to the desired speed, press the “RES/SET” switch to the “SET” side once. Now the desired speed ...