Chrysler 200: Setting The Analog Clock - Understanding your instrument panel - Chrysler 200 Owners ManualChrysler 200: Setting The Analog Clock

To set the analog clock, located at the top center of the instrument panel, press and hold the button in until the setting is correct. The clock will adjust slowly at first and then quicker the longer the button is held.

Setting The Analog Clock
Setting The Analog Clock

    Personal Settings (Customer-Programmable Features)
    Personal Settings allows the driver to set and recall features when the automatic transaxle is in PARK. Press and release the MENU button until Personal Settings displays in the EVIC. Press an ...

    Media Center 230 (REQ) AM/FM Stereo Radio And 6Disc CD/DVD Changer (MP3/WMA AUX Jack)
    NOTE: The radio sales code is located on the lower right side of the radio faceplate. Media Center 230 (REQ) ...

    See also:

    Headlamp High/Low-Beam Changer
    (Headlamp High/Low-Beam Changer): Push the turn signal/lane change lever away from you and release, to turn the high beams on. To return to low beams, push the lever again or pull it toward y ...

    Tire identification marks
    Tire size 255/50 R 19 103 Y 255: nominal width in mm 50: aspect ratio in % R: radial tire code 19: rim diameter in inches 103: load rating, not for ZR tires Y: speed rating, before the R on ZR ...

    Turning off the accessory alarm sensors
    In certain situations it may be desirable to turn off the accessory inclination and movement alarm sensors if, for example, you drive your vehicle onto a ferry where the rocking of the boat could ...