Buick LaCrosse: Starting the Vehicle - Remote Vehicle Start - Initial Drive Information - In Brief - Buick LaCrosse Owners ManualBuick LaCrosse: Starting the Vehicle

1. Aim the RKE transmitter at the vehicle.

2. Press and release 3. Immediately after completing.

3. Immediately after completing Step 2, press and hold the turn signal lamps flash, or for until the turn signal lamps flash, or for about two seconds if the vehicle is not in view.

When the engine starts, the parking lamps will turn on and remain on as long as the engine is running. The doors will be locked and the climate control system may come on.

The engine will continue to run for 10 minutes. Repeat the steps for a 10-minute time extension. Remote start can be extended only once.

    Remote Vehicle Start
    For vehicles with this feature, the engine can be started from outside the vehicle. ...

    Canceling a Remote Start
    To cancel a remote start, do one of the following: • Aim the RKE transmitter at the vehicle and press and hold until the parking lamps turn off. • Turn on the hazard warning flashers. ...

    See also:

    Operating audio player or audio media
    Audio data from various audio devices or media can be played, depending on the equipment installed in the vehicle. •► Switch on COMAND and select the audio device or medium (see the sep ...

    Managing the Vehicle Damage Repair Process
    In the event that the vehicle requires damage repairs, GM recommends that you take an active role in its repair. If you have a pre-determined repair facility of choice, take the vehicle ther ...

    SBZA Detection Zones
    The SBZA sensor covers a zone of approximately one lane over from both sides of the vehicle, or 3.5m(11 ft). This zone starts at each side mirror and goes back approximately 5.0 m(16 ft). Th ...