BMW 5 Series: Status display - FTM Flat Tire Monitor - Safety - Controls - BMW 5 Series Owners ManualsBMW 5 Series: Status display

The current status of the Flat Tire Monitor can be displayed on the Control Display, e.g., whether or not the FTM is active.

1. "Vehicle Info"
2. "Vehicle status"
3. The status is displayed. "Flat Tire Monitor"
The status is displayed.

    System limits
    Sudden tire damage Sudden serious tire damage caused by external influences cannot be indicated in advance.◀ A natural, even pressure loss in all four tires cannot be detected. Therefore, ...

    Initialization
    The initialization process adopts the set inflation tire pressures as reference values for the detection of a flat tire. Initialization is started by confirming the inflation pressures. Do not ...

    See also:

    Intermittent Wiper System
    Use the intermittent wiper system when weather conditions make a single wiping cycle with a variable pause between cycles desirable. Rotate the end of the windshield wiper/washer control lever t ...

    Correct driver's seat position
    Observe the safety guidelines on seat adjustment •► Check whether you have adjusted seat = properly. Electrical seat adjustment (Y page 100) When adjusting the seat, make sure: &nbs ...

    Removing a headlamp
    1. Open the bonnet. See Opening andclosing the bonnet. 2. Remove the screws. CAUTION: Do not pull the bumper more than 10mm from its original position. 3. Carefully pull the bumper towards the ...