Nissan Altima: Stopping the vehicle
1. Safely move the vehicle off the road and
away from traffic.
2. Turn on the hazard warning flashers.
3. Park on a level surface and apply the parking
brake. Shift the manual transmission into R
(Reverse), or the CVT into P (Park).
4. Turn off the engine.
5. Raise the hood to warn other traffic and to
signal professional road assistance personnel
that you need assistance.
6. Have all passengers get out of the vehicle
and stand in a safe place, away from traffic
and clear of the vehicle.
WARNING
● Make sure the parking brake is securely applied and the manual transmission is shifted into R (Reverse), or the CVT is shifted into P (Park).
● Never change tires when the vehicle is on a slope, ice or slippery areas. This is hazardous.
● Never change tires if oncoming traffic is close to your vehicle. Wait for professional road assistance.
Changing a flat tire
If you have a flat tire, follow the instructions below: ...Blocking wheels
Place suitable blocks 1 at both the front and back of the wheel diagonally opposite the flat tire 2 to prevent the vehicle from moving when it is jacked up. WARNING Be sure to block the wheel a ...See also:
Overview: changing bulbs/bulb types
You can change the following bulbs. The bulb
type can be found in the legend
Halogen headlamps
1. Low-beam headlamps: H7 55
2. High-beam headlamp: H7 55 W
3. Parking lamp/standing lamp: ...
R (Reverse)
This position is for backing the vehicle. To shift from the “N” to “R” position,
stop the vehicle completely then move the lever to the “R” position. ...
Engine Oil
To ensure proper engine performance and long life, careful attention must be paid to engine oil.
Following these simple, but important steps will help protect your investment:
► Always use eng ...