Buick Regal: Sunroof - Vehicle Features - In Brief - Buick Regal Owners ManualBuick Regal: Sunroof

On vehicles with a sunroof, the switch is located on the overhead console.

On vehicles with a sunroof, the switch is located on the overhead console.

The sunroof only operates when the ignition is in ON/RUN or ACC/ ACCESSORY or in Retained Accessory Power (RAP). See Retained Accessory Power (RAP)  for more information.

To open or close the sunroof , press the open or close sunroof switch (A) to the first detent position. The safety function will stay enabled as long as the switch is operated.

To automatically open or close the sunroof with the safety function enabled, firmly press the open or close sunroof switch (A) to the second detent position and release.

To stop the movement, press the switch once more.

To automatically tilt or close the sunroof with the safety function enabled, press the tilt open or close sunroof switch (B).

If an object is in the path of the sunroof while it is closing, the anti-pinch feature will detect the object and stop the sunroof from closing at the point of the obstruction. The sunroof will then return to the full-open or vent position.

The sunroof glass panel cannot be opened or closed if the vehicle has an electrical failure.

See Sunroof  for more information.

    Power Outlets
    The accessory power outlet can be used to plug in electrical equipment, such as a cell phone, an MP3 player, etc. This outlet is located under the armrest inside the center console storage. The vehi ...

    See also:

    Sound output
    Switching on/off When the ignition is switched off: press ON/OFF button on the radio. Muting When the ignition is switched on or the engine is running: press the ON/OFF button on the radio. ...

    Curve Tips
    • Take curves at a reasonable speed. • Reduce speed before entering a curve. • Maintain a reasonable steady speed through the curve. • Wait until the vehicle is out of the curve bef ...

    Listing Stored Numbers
    The list command will list all the stored numbers and name tags. Using the “List” Command 1. Press . The system responds “Ready,” followed by a tone. 2. Say “Directory.”. 3. Say ...