Ford Fusion: Switching off the engine - Starting the engine - Ford Fusion Owners manualFord Fusion: Switching off the engine

Vehicles with a turbocharger

CAUTION:

Do not switch the engine off when itis running at high speed. If you do,the turbocharger will continuerunning after the engine oil pressure hasdropped to zero. This will lead topremature turbocharger bearing wear.

Release the accelerator pedal. Wait untilthe engine has reached idle speed andthen switch it off.

    Starting a diesel engine
    Cold or hot engine All vehicles Note: When the temperature is below-15ºC (5ºF), you may need to crank theengine for up to 25 seconds. If youconsistently operate the vehicle in suchtemperat ...

    See also:

    Automatic mode
    The automatic engine start/stop function is operational after each engine start. The function is activated above a certain speed. ▷ Manual transmission: above 3 mph, approx. 5 km/h. ▷ ...

    Changing the battery
    You require a CR 2025 3 V cell battery. •► Take the mechanical key out of the SmartKey •► Press mechanical key 2 into the opening in the SmartKey in the direction of the arrow ...

    How to Reset the Engine Oil Life System
    Reset the system whenever the engine oil is changed so that the system can calculate the next engine oil change. To reset the system: 1. Turn the ignition to ON/RUN with the engine off. 2. ...