Mercedes-Benz E-Class: Switching on Night View Assist Plus - Night View Assist Plus - Driving systems - Driving and parking - Mercedes-Benz E-Class Owners ManualMercedes-Benz E-Class: Switching on Night View Assist Plus

Depending on your vehicle's date of manufacture, the symbol for or the "Automatic driving lights/daytime symbol for the "Automatic driving lights/daytime running lamps" position is located on the light switch.

You can only activate Night View Assist Plus

You can only activate Night View Assist Plus if:

 - the SmartKey is in position 2 in the ignition lock.
 - it is dark.
 - the light switch is set to either or, . or  - reverse gear has not been engaged..

 - reverse gear has not been engaged.

•► Make sure that COMAND is switched on.

•► Press button 1.

The Night View Assist Plus display appears in the COMAND display.

1. Night View Assist Plus display

1. Night View Assist Plus display
2. Pedestrian recognized
3. Framing
4. Symbol for active pedestrian recognition

You can read about how to adjust the brightness of the COMAND display in the COMAND operating instructions.

The infrared lamps switch on automatically from a speed of about 6 mph (10 km/h). This means that you do not have the full visual range while the vehicle is stationary and cannot check whether Night View Assist Plus is working.

    Important safety notes
    In addition to the illumination provided by the normal headlamps, Night View Assist Plus uses infrared light to illuminate the road. The Night View Assist Plus camera picks up the infrared lig ...

    Pedestrian recognition
    WARNING Pedestrian recognition may be impaired or inoperative if:  - pedestrians are partially or entirely obscured by objects, e.g. parked vehicles.  - the silhouette of the pede ...

    See also:

    Servicing the Airbag-Equipped Vehicle
    Airbags affect how the vehicle should be serviced. There are parts of the airbag system in several places around the vehicle. Your dealer and the service manual have information about servic ...

    Receiving XM Radio Service
    If your XM Radio service has expired or you purchased your vehicle from a previous owner, you can listen to a sampling of the broadcasts available on XM Radio. With the ignition switch in th ...

    To increase the speed (by accelerator pedal)
    1. Depress the accelerator pedal to accelerate the vehicle to the desired speed. 2. Press the “RES/SET” switch to the “SET” side once. Now the desired speed is set and the vehicle will keep ...