BMW 5 Series: Switching spoken instructions on/off
The setting is stored for the remote control currently in use.
1. "Navigation"
2. "Map"
3. 
"Voice instructions"
Repeating spoken instructions
1. "Navigation"
2. "Map"
3. 
Highlight the symbol.
4. Press the controller twice.
Volume of spoken instructions
Turn the volume button while giving an instruction until the desired volume is set.
Saving the spoken instructions on the programmable memory buttons
The function for switching the spoken instructions on/off can be stored on a programmable memory button, for quick access.
Gas station recommendation
The remaining range is calculated, and if necessary
gas stations along the route are displayed.
1. "Navigation"
2. "Route information"
3. "Recommended refuel"
A lis ...
Map view
Selecting the map view
1. "Navigation"
2. "Map" ...
See also:
Removing air intake duct
Use a screwdriver to undo the clips on the air intake duct, then remove the air
intake duct. Refer to “Type A clips” F11-5. ...
2.0 L L4 Engine Shown, 2.4 L L4 Engine Similar
1. Remove the coolant surge tank pressure cap when the cooling system, including the coolant surge tank pressure cap and upper radiator hose, is no longer hot.
Turn the pressure cap slowly counterc ...
Function check
All indicator and warning symbols light up in ignition mode II or when the engine
is started. When the engine has started, all the symbols should go out except the
parking brake symsymbol, which o ...
