BMW 5 Series: Switching the warning function on/off - Collision warning with 
braking function - Driving comfort - Controls - BMW 5 Series Owners ManualsBMW 5 Series: Switching the warning function on/off

Press the button

▷ On: the LED lights up. Press the button

▷ On: the LED lights up.
▷ Off: the LED goes out.

The state is stored for the remote control currently in use.

    Warning stages
    Prewarning This warning is issued, for example, when there is the impending danger of a collision or the distance to the vehicle ahead is too small. Acute warning with braking function Warning ...

    Configuring the prewarning
    After the warning function is switched on, the following can be set via the iDrive: ▷ The prewarning can be switched on/off. ▷ The time of the prewarning can be set. These settings ha ...

    See also:

    Installing a Child Seat with LATCH
    Your vehicle is equipped with LATCH (Lower Anchors and Tethers for CHildren) at the outer rear seats. The lower anchors are located between the seat-back and seat bottom, and are to be used ...

    Gross Axle Weight Rating (GAWR)
    The GAWR is the maximum capacity of the front and rear axles. Distribute the load over the front and rear axles evenly. Make sure that you do not exceed either front or rear GAWR. Refer to “Ve ...

    Memory Features
    On vehicles with the memory feature, the “1” and “2” buttons on the outboard side of the driver seat are used to manually save and recall the driver seat and outside mirror positio ...