BMW 5 Series: The concept - High-beam Assistant - Lamps - Controls - BMW 5 Series Owners ManualsBMW 5 Series: The concept

When the low beams are switched on, this system automatically switches the high beams on and off. The procedure is controlled by a sensor on the front of the interior rearview mirror. The assistant ensures that the high beams are switched on whenever the traffic situation allows.

The driver can intervene at any time and switch the high beams on and off as usual.

    Activating
    1. Turn the light switch to or . 2. Press the button on the turn signal lever, arrow. The indicator lamp in the instrument cluster lights up. When the lights are switched on, the high be ...

    See also:

    Exterior mirror out of position
    If an exterior mirror has been pushed out of position, proceed as follows: •► Vehicles without electrically folding exterior mirrors: move the exterior mirror into the correct position ...

    Loading tips
    ● The GVW must not exceed GVWR or GAWR as specified on the F.M.V.S.S./C.M.V.S.S. certification label. ● Do not load the front and rear axle to the GAWR. Doing so will exceed the GVWR ...

    Inside Day/Night Mirror
    A two-point pivot system allows for horizontal and vertical mirror adjustment. Adjust the mirror to center on the view through the rear window. Headlight glare can be reduced by moving the small ...