Buick LaCrosse: Tire Messages - Vehicle Messages - Instruments and Controls - Buick LaCrosse Owners ManualBuick LaCrosse: Tire Messages

TIRE PRESSURE LOW ADD AIR TO TIRE

On vehicles with the Tire Pressure Monitor System (TPMS), this message displays when the pressure in one or more of the vehicle's tires is low.

The low tire pressure warning light will also come on. See Tire Pressure Light.

If a tire pressure message appears on the DIC, stop as soon as you can. Inflate the tires by adding air until the tire pressure is equal to the values shown on the Tire and Loading Information label. See Tires, Vehicle Load Limits, and Tire Pressure.

You can receive more than one tire pressure message at a time. To read the other messages that may have been sent at the same time, press the SET/CLR button. The DIC also shows the tire pressure values.

See Driver Information Center (DIC).

SERVICE TIRE MONITOR SYSTEM

This message displays if there is a problem with the Tire Pressure Monitor System (TPMS). See Tire Pressure Monitor Operation for more information.

TIRE LEARNING ACTIVE

This message displays when the system is learning new tires. See Tire Pressure Monitor Operation for more information.

    Starting the Vehicle Messages
    JUMP START ACTIVE WAIT TO START This message displays while performing an on-board jump start of the vehicle. See “Jump Starting (On-board with eAssist Only)” for more information. JUM ...

    Transmission Messages
    SERVICE TRANSMISSION This message displays if there is a problem with the transmission. See your dealer. SHIFT TO PARK This message displays when the transmission needs to be shifted to P ( ...

    See also:

    Vehicle load capacity
    Do not exceed the load limit of your vehicle shown as “The combined weight of occupants and cargo” on the Tire and Loading Information label. Do not exceed the number of occupants shown as ...

    Playing an iPod (Models without navigation system)
    Playing an iPod (Models without navigation system) ...

    Center ventilators
    1) Open 2) Close Move the tab to adjust the flow direction. To open the ventilator, turn the center grille open/close wheel to the “” position. To close it, turn the wheel to the “” ...