Chrysler 200: Towing Requirements – Trailer Lights And Wiring - Towing Requirements - Trailer Towing - Starting and operating - Chrysler 200 Owners ManualChrysler 200: Towing Requirements – Trailer Lights And Wiring

Whenever you pull a trailer, regardless of the trailer size, stop lights and turn signals on the trailer are required for motoring safety.

    Towing Requirements – Trailer Brakes
    • Do not interconnect the hydraulic brake system or vacuum system of your vehicle with that of the trailer. This could cause inadequate braking and possible personal injury. • An electronica ...

    Towing Tips
    Before setting out on a trip, practice turning, stopping, and backing the trailer in an area located away from heavy traffic. Make sure all trailer and vehicle lights are working properly — i ...

    See also:

    Opening and closing
    Overhead control panel 1. To raise 2. To open 3. To close/lower The panorama roof with power tilt/sliding panel can only be operated when the roller sunblind is open. •► Turn ...

    Windshield wiper and washer switch
     Windshield wiper and washer switch The windshield wiper and washer operates when the ignition switch is in the ON position. Push the lever down to operate the wiper at the following spee ...

    Engine compartment
    A - Engine compartment, upper B - Engine compartment, front C - Engine compartment, lower Positions These fuses are all located in C the engine compartment box. Fuses in are located under A. ...