Subaru Legacy: Treadwear - Uniform tire quality grading standards - Consumer information and Reporting safety defects - Subaru Legacy Owners ManualSubaru Legacy: Treadwear

The treadwear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a specified government test course.

For example, a tire graded 150 would wear one and one-half (1- 1/2) times as well on the government course as a tire graded 100. The relative performance of tires depends upon the actual conditions of their use, however, and may depart significantly from the norm due to variations in driving habits, service practices and differences in road characteristics and climate.

    Uniform tire quality grading standards
    This information indicates the relative performance of passenger car tires in the area of treadwear, traction, and temperature resistance. This is to aid the consumer in making an informed choice ...

    Traction AA, A, B, C
    The traction grades, from highest to lowest, are AA, A, B and C. Those grades represent the tire’s ability to stop on wet pavement as measured under controlled conditions on specified government ...

    See also:

    Driving in flooded areas
    Avoid driving through flooded areas unless you are sure the water is no higher than the bottom of the wheel hub. Drive through any water slowly. Allow adequate stopping distance because brake perf ...

    Radiator and condenser
    Check the radiator and condenser and clear away any foreign objects. If either of the above parts is extremely dirty or you are not sure of their condition, have your vehicle inspected by your To ...

    Resuming a Set Speed
    If the cruise control is set at a desired speed and then the brakes are applied or the is pressed, the cruise control is disengaged without erasing the set speed from memory. Once the vehicl ...