BMW 5 Series: Trip computer - Speed limit - Displays - Controls - BMW 5 Series Owners ManualsBMW 5 Series: Trip computer

There are two types of computer.

▷ "Onboard info": the values can be reset as often as necessary.
▷ "Trip computer": the values provide an overview of the current trip.

Resetting the trip computer

1. "Vehicle Info"
2. "Trip computer"
3. "Reset": all values are reset.

"Automatically reset": all values are reset approx. 4 hours after the vehicle comes to a standstill.

Display on the Control Display

    Speed limit
    Display of a speed limit which, when reached, should cause a warning to be issued. Renewed warning if the vehicle speed drops below the set speed limit once by at least 3 mph/ 5 km/h. Displayi ...

    Display on the Control Display
    Display the computer or trip computer on the Control Display. 1. "Vehicle Info" 2. "Onboard info" or "Trip computer" Resetting the fuel consumption or speed 1. &q ...

    See also:

    Check the fluid level monthly.
    1. Drive the vehicle several miles to raise the temperature of the transmission fluid up to normal operating temperature; 158 to 1768F (70 to 808C) is normal. 2. Park the vehicle on a level surface ...

    S mode
    ●When the shift range is “4” or lower, holding the shift lever toward “+” sets the shift range to “6”. ●To prevent the engine from over-revving, upshifting may automatical ...

    Fuse box in the engine compartment
    •► Make sure that the windshield wipers are turned off. WARNING Make sure that the windshield wipers are switched off and that the SmartKey is removed from the ignition lock before ...