Mercedes-Benz E-Class: Trip computer "From start" or "From
reset"
The values in the From Start submenu are calculated from the start of a journey, while the values in the From Reset submenu are calculated from the last time the submenu was reset
•► Press the or
button on the
steering wheel to select the Trip menu.
•► Press the or
button to select
From Start or From Reset.
Trip computer "From start" (example)
1. Distance
2. Time
3. Average speed
4. Average fuel consumption
The From Start trip computer is reset automatically if:
- the ignition has been switched off for more
than four hours.
- 999 hours have been exceeded.
- 9,999 miles have been exceeded.
When 9,999 hours or 99,999 miles have been exceeded, the trip computer is automatically reset From Reset.
Standard display
•► Press and hold the button on
the
steering wheel until the Trip menu with
odometer 1 and trip odometer 2 is
shown. ...
Displaying the range and current fuel
consumption
•► Press the button on the
steering wheel to select the Trip menu.
•► Press the button to select
current fuel consumption21 and
approximate range.
The approximate range tha ...
See also:
Programming HomeLink
1. To begin, press and hold the two outer
HomeLink buttons (to clear the memory)
until the indicator light 1 blinks (after 20
seconds). Release both buttons.
2. Position the end of the hand-held ...
Installing a booster seat
WARNING
● Child restraint systems and seatbelts can become hot in a vehicle that has
been closed up in sunny weather; they could burn a small child. Check the child
restraint system before ...
Halogen Bulbs
WARNING!
Halogen bulbs have pressurized
gas inside and can burst if you
drop or scratch the bulb. You or
others could be injured. Be sure
to read and follow the instructions
on the bulb pac ...