Volvo S60: Unbuckling the seat belt
To remove the seat belt, press the red section on the seat belt receptacle. Before exiting the vehicle, check that the seat belt retracts fully after being unbuckled. If necessary, guide the belt back into the retractor slot.
Fastening a seat belt
Buckling
Pull the belt out far enough to insert the latch plate into the receptacle until
a distinct click is heard. The seat belt retractor is normally "unlocked" and you
can move free ...
Seat belt maintenance
Check periodically that the seat belts are in good condition. Use water and a
mild detergent for cleaning. Check seat belt mechanism function as follows: attach
the seat belt and pull rapidly on t ...
See also:
Function
Location of the laser sensor in the windshield2
City Safety™ monitors traffic ahead of you using a laser sensor mounted in the
upper section of the windshield. If a collision is imminent, City ...
Jump Start (eAssist Only)
This display allows for on-board
jump starting of the vehicle. See
“Jump Starting (On-board with
eAssist Only)” for more information. ...
Removal and Installation of the
Sealant Canister
To remove the sealant canister:
1. Remove the plastic cover.
2. Unscrew the connector (B) from
the canister (A).
3. Pull up on the canister (A) to
remove it.
4. Replace with a new canister
...
