Buick Regal: Using the Directory Command - Bluetooth (Voice Recognition) - Phone - Infotainment System - Buick Regal Owners ManualBuick Regal: Using the Directory Command

The directory command lists all of the name tags stored by the system.

To use the directory command:

1. Press ► For vehicles without a navigation system, the system responds “Ready,” followed by a tone..

► For vehicles without a navigation system, the system responds “Ready,” followed by a tone.

► For vehicles with a navigation system, the system responds with a tone. After the tone, say “Hands Free.” The system responds “Ready,” followed by a tone.2. Say “Directory.” The system responds “Directory” and lists all stored name tags. The system returns to the main menu when the list is complete.

    Using the Digit Store Command
    The digit store command allows a phone number to be stored by entering the digits individually. 1. Press . ► For vehicles without a navigation system, the system responds “Ready,” followe ...

    Deleting Name Tags
    The system uses the following commands to delete name tags: ► Delete ► Delete all name tags ...

    See also:

    Switch operation
    The windshield wiper and washer switch operates when the ignition switch is placed in the ON position. Push the lever down to operate the wiper at the following speed: 1 Intermittent — interm ...

    Lower Anchor and Top Tether Anchor Locations
    Rear Seat (Top Tether Anchor): Seating positions with top tether anchors. (Lower Anchor): Seating positions with two lower anchors. To assist you in locating the lower anchors, each rear anc ...

    Using the Tire Sealant and Compressor Kit without Sealant to Inflate a Tire (Not Punctured)
    To use the air compressor to inflate a tire with air only and not sealant: If a tire goes flat, avoid further tire and wheel damage by driving slowly to a level place. Turn on the hazard wa ...