Buick Regal: Using the Store Command - Bluetooth (Voice Recognition) - Phone - Infotainment System - Buick Regal Owners ManualBuick Regal: Using the Store Command

The store command allows a phone number to be stored without entering the digits individually.

1. Press ► For vehicles without a navigation system, the system responds “Ready,” followed by a tone..

► For vehicles without a navigation system, the system responds “Ready,” followed by a tone.

► For vehicles with a navigation system, the system responds with a tone. After the tone, say “Hands Free.” The system responds “Ready,” followed by a tone.

2. Say “Store.” The system responds “Store, number please,” followed by a tone.

3. Say the complete phone number to be stored without pausing.

► If the system recognizes the number, the response is “OK, Storing.” . If the system does not recognize the phone number, the response is “Store <Phone number>.” “Please say yes or no.” If the number is correct, say “Yes.” If the number is not correct, say “No.” The system will ask for the number again.

4. After the system stores the phone number, it responds “Please say the name tag,” followed by a tone.

5. Say a name tag for the phone number. The name tag is recorded and the system responds “About to store <name tag>. Does that sound OK?” . If the name tag does not sound correct, say “No” and repeat Step 5.

► If the name tag sounds correct, say “Yes” and the name tag is stored. After the number is stored, the system returns to the main menu.

    Storing Name Tags
    The system can store up to 30 phone numbers as name tags that are shared between the Bluetooth and OnStar systems. The system uses the following commands to store and retrieve phone numbers: ► ...

    Using the Digit Store Command
    The digit store command allows a phone number to be stored by entering the digits individually. 1. Press . ► For vehicles without a navigation system, the system responds “Ready,” followe ...

    See also:

    Windshield wiper blades. Replacing
    Replace the wiper blades if they are worn. 1. Lift the wiper arm away from the windshield. 2. Push the release tab, then move the wiper blade down the wiper arm to remove. 3. Remove the wiper blade ...

    Cleaning the interior
    Seat belts WARNINGS: Do not use abrasives, or chemicalsolvents to clean them. Do not allow moisture to penetratethe seat belt retractor mechanism. Clean the seat belts with interior cleaneror wate ...

    Arming the alarm
    Press the Lock button on the remote key. One long flash of the turn signals will confirm that the alarm is armed. Alarm confirmation settings can be changed in MY CAR, under Car settings  - ...