Toyota Camry: Warning lights
Warning lights inform the driver of malfunctions in any of the vehicle’s systems.
*1: These lights turn on when the engine switch is turned to the “ON” position (vehicles without a smart key system) or the “ENGINE START STOP” switch is turned to IGNITION ON mode (vehicles with a smart key system) to indicate that a system check is being performed. They will turn off after the engine is started, or after a few seconds. There may be a malfunction in a system if a light does not come on, or if the lights do not turn off. Have the vehicle inspected by your Toyota dealer.
*2: In order to confirm operation, the BSM outside rear view mirror indicators illuminate in the following situations:
• When the “ENGINE START STOP” switch is turned to IGNITION ON mode while the BSM main switch is set to ON.
• When the BSM main switch is set to ON while the “ENGINE START STOP” switch is in IGNITION ON mode.
If the system is functioning correctly, the BSM outside rear view mirror indicators will turn off after a few seconds.
If the BSM outside rear view mirror indicators do not illuminate or do not turn off, there may be a malfunction with the system.
If this occurs, have the vehicle inspected by your Toyota dealer.
*3: The light comes on in yellow to indicate a malfunction.
*4: The light flashes in yellow to indicate a malfunction. The light flashes quickly in green to indicate that the steering lock has not been released.
■If a safety system warning light does not come on
Should a safety system light such as the ABS or SRS warning light not come on when you start the engine, this could mean that these systems are not available to help protect you in an accident, which could result in death or serious injury. Have the vehicle inspected by your Toyota dealer immediately if this occurs.
If No Steam Is Coming from the Engine Compartment
If an engine overheat warning is displayed but no steam can be seen or heard, the problem may not be too serious. Sometimes the engine can get a little too hot when the vehicle: ► Climbs a long ...
Installing Child Restraint Tether Strap
1. Rotate the cover over the anchor directly behind the seat where you are placing the child restraint. Installing Child Restraint Tether Strap 1 — Cover 3 — Attaching Strap A — Tether Strap ...
Adjusting the steering wheel 1 - Lever for releasing/locking the steering wheel 2 - Possible positions The steering wheel can be adjusted for both height and reach: 1. Pull the lever toward you ...