BMW 5 Series: Warning of people in danger - Night Vision with pedestrian 
detection - Driving comfort - Controls - BMW 5 Series Owners ManualsBMW 5 Series: Warning of people in danger

If the system detects a person in the defined

If the system detects a person in the defined area in front of the vehicle and if there is the danger of a collision with this person, a warning symbol appears in the Control Display and Head-up Display.

Although both the shape and the heat radiation are analyzed, false warnings cannot be ruled out.

Warning area in front of the vehicle

Warning area in front of the vehicle
Warning area in front of the vehicle

The warning area in front of the vehicle is divided into two areas.

▷ Central area 1 directly in front of the vehicle.
▷ Expanded area 2 to the right and left.

The entire area moves along with the vehicle in the direction of the steering angle and changes with the vehicle speed. As the vehicle speed increases, the area becomes longer and wider, for example.

Prewarning

when a The yellow symbol is displayed when a person is detected in the central area, arrow 1, immediately in front of the vehicle.

when a The yellow symbol is displayed when a person detected in the extended area, arrow 2, is moving from the right or left to the central area.

Acute warning

a signal The red symbol is displayed and a signal sounds. You are requested to intervene immediately by braking or making an evasive maneuver.

Display in the Head-up Display

displayed The warning is simultaneously displayed in the Head-up Display and in the Control Display. The displayed symbol can vary with the people detected. For people located in the central area, the distance to the person is indicated by the size of the symbol

    Pedestrian detection
    The pedestrian detection and warning system only operates in darkness and only when a heat image is displayed. Warm objects that are similar in shape to human beings are detected by the syste ...

    System limits
    Basic limits System operation is limited in situations such as the following: ▷ On steep hills, in steep depressions or in tight curves. ▷ When the camera is dirty or the protective ...

    See also:

    Reprogramming a single HomeLink button
    To reprogram a HomeLink Universal Transceiver button, complete the following. 1. Press and hold the desired HomeLink button. Do not release the button until step 4 has been completed. 2. When the ...

    Dehumidified defogging
    This mode is used to defog the windows and dehumidify the air. 1. Press the air flow control button. 2. Turn the fan control dial to the desired position. ● When the or are selected, t ...

    How to speak numbers
    Voice Recognition requires a certain way to speak numbers when giving voice commands. Refer to the following examples. General rule: ● Only single digits 0 (zero) to 9 can be used. ● ...