Toyota Camry: Wheels
If a wheel is bent, cracked or heavily corroded, it should be replaced. Otherwise, the tire may separate from the wheel or cause a loss of handling control.
- Wheel selection
- Aluminum wheel precautions (if equipped)
- When replacing wheels (vehicles with a tire pressure warning system)
Instructions for checking tire inflation pressure
When checking tire inflation pressure, observe the following:
●Check only when the tires are cold.
If your vehicle has been parked for at least 3 hours or has not been
driven for more than 1 ...
Wheel selection
When replacing wheels, care should be taken to ensure that
they are equivalent to those removed in load capacity, diameter,
rim width, and inset*.
Replacement wheels are available at your Toyota ...
See also:
MMT
Some gasoline contains an octane-enhancing additive called MMT (Methylcyclopentadienyl
Manganese Tricarbonyl). If you use such fuels, your emission control system performance
may deteriorate and t ...
Checking the wiper blades
Checking the wiper blades
Run the tip of your fingers over the edgeof the blade to check for roughness.
Clean the wiper blade lips with waterapplied with a soft sponge. ...
Engine low oil level warning light
The engine low oil level warning light illuminates when the ignition switch is
turned to the “ON” position and turns off after approximately 2 seconds.
This light also illuminates when the en ...
