Chrysler 200: With Tip Start
If the engine fails to start after you have followed the “Normal Starting” or “Extreme Cold Weather” procedures, it may be flooded. To clear any excess fuel, push the accelerator pedal all the way to the floor and hold it.
Then, turn the ignition switch to the START position and release it as soon as the starter engages. The starter motor will disengage automatically in 10 seconds. Once this occurs, release the accelerator pedal, turn the ignition switch to the LOCK position, wait 10 to 15 seconds, then repeat the “Normal Starting” procedure.
CAUTION!
To prevent damage to the starter, wait 10 to 15 seconds
before trying again.
Without Tip Start
If the engine fails to start after you have followed the
“Normal Starting” or “Extreme Cold Weather” procedures,
it may be flooded. Push the accelerator pedal all
the way to the floor an ...
After Starting
The idle speed will automatically decrease as the engine
warms up. ...
See also:
RADIO menus
Main AM menu AM menu
Show presets Scan Audio settings1
Sound stage Equalizer Volume compensation Reset all audio settings
Main FM1/FM2 menu FM menu
Show radio text Show pre ...
Climate control windshield
Climate control windshield
The marked area is not covered with heat reflective
coating.
Use this area for garage door openers, devices
for electronic toll collection, etc. ...
Control panel buttons - color screen without Navigation System (if so equipped)
1. STATUS button.
2. INFO button.
3. NISSAN controller.
4. OFF brightness control button.
5. BRIGHT + (brightness control) button.
6. BRIGHT (brightness control) button.
7. BACK (previous) bu ...