Nissan Maxima: Xenon headlights (if so equipped) - Instruments and controls - Nissan Maxima Owners ManualNissan Maxima: Xenon headlights (if so equipped)

WARNING:

HIGH VOLTAGE:

- When xenon headlights are on, they produce a high voltage. To prevent an electric shock, never attempt to modify or disassemble. Always have your xenon headlights replaced at a NISSAN dealer.

- Xenon headlights provide considerably more light than conventional headlights.

If they are not correctly aimed, they might temporarily blind an oncoming driver or the driver ahead of you and cause a serious accident. If headlights are not aimed correctly, immediately take your vehicle to a NISSAN dealer and have the headlights adjusted correctly.

When the xenon headlight is initially turned on, its brightness or color varies slightly. However, the color and brightness will soon stabilize.

- The life of xenon headlights will be shortened by frequent on-off operation.

It is generally desirable not to turn off the headlights for short intervals (for example, when the vehicle stops at a traffic signal).

- If the xenon headlight bulb is close to burning out, the brightness will drastically decrease, the light will start blinking, or the color of the light will become reddish. If one or more of the above signs appear, contact a NISSAN dealer.

    Rear window and outside mirror (if so equipped) defroster switch
     Type A To defrost the rear window glass and outside mirrors (if so equipped), start the engine and push the rear window defroster switch on. The rear window defroster indicator light on t ...

    Headlight control switch
    Lighting  Type A  Type B (1) When turning the switch to the position, the front parking, tail, license plate and instrument panel lights come on.  (2)- When turning the swit ...

    See also:

    Tires
    Problem Possible causes/consequences and •► Solutions USA only: The yellow tire pressure monitor warning lamp (pressure loss/ malfunction) is lit. Canada only: The ye ...

    Towing Assistance
    If you need towing assistance: • Press the button to begin. • After the “Ready” prompt and the following beep, say “Towing Assistance”. NOTE: • The towing assistance number dialed ...

    Re-installing the wheel
    1. Clean the contact surfaces on the wheel and hub. 2. Lift the wheel and place it on the hub. Tighten the lug nuts 3. Install the wheel nuts and tighten handtight. Using the lug wrench, tighten ...