Subaru Legacy: ABS warning light
The ABS warning light illuminates when the ignition switch is turned to the “ON” position and turns off after approximately 2 seconds.
This is an indication that the ABS system is working properly.
CAUTION
● If any of the following conditions occur, we recommend that you have the ABS system repaired at the first available opportunity by your SUBARU dealer.
– The warning light does not illuminate when the ignition switch is turned to
the “ON” position.
– The warning light illuminates when the ignition switch is turned to the “ON” position,
but it does not turn off even when the vehicle speed exceeds approximately 12 km/h
(8 mph).
– The warning light illuminates during driving.
– The warning light flashes.
● When the warning light is on (and brake system warning light is off), the ABS function shuts down; however, the conventional brake system continues to operate normally.
● When the warning light is flashing, the ABS system may be malfunctioning. However, the conventional brake system continues to operate normally.
The ABS warning light illuminates together with the brake system warning light if the EBD system malfunctions. For further details of the EBD system malfunction warning, refer to “Brake system warning light” F3-17.
NOTE
If the warning light behavior is as described in the following conditions, the
ABS system may be considered normal.
● The warning light illuminates right after the engine is started but turns off
immediately, remaining off.
● The warning light remains illuminated after the engine has been started, but it
turns off when the vehicle speed reaches approximately 8 mph (12 km/h).
● The warning light illuminates during driving, but it turns off immediately and
remains off.
When driving with an insufficient battery voltage such as when the engine is jump started, the ABS warning light may illuminate. This is due to the low battery voltage and does not indicate a malfunction. When the battery becomes fully charged, the light will turn off.
Low tire pressure warning light (U.S.-spec. models)
When the ignition switch is turned to the “ON” position, the low tire pressure warning light will illuminate for approximately 2 seconds to check that the tire pressure monitoring system (TP ...Brake system warning light
WARNING ● Driving with the brake system warning light on is dangerous. This indicates your brake system may not be working properly. If the light remains illuminated, have the brakes insp ...See also:
Manual Operation
(Power): Press to turn the fan
off
or on.
(Fan Control): Press to
increase or decrease the fan speed.
The fan speed setting appears on
the main display. Pressing either
button cancels au ...
How to use the rear view camera
When the shift lever or select lever is set to “R”, the rear view camera automatically
displays the rear view image from the vehicle. When the lever is set to other positions,
the image before ...
Buttons at a glance
1. System on/off, interrupt
2. Resume speed
3. Store speed
4. Reduce distance
5. Store, maintain/change speed
6. Increase distance ...