Mercedes-Benz E-Class: Activating the HOLD function
•► Make sure that the activation conditions are met.
•► Depress the brake pedal.
•► Quickly depress the brake pedal further until HOLD display 1 appears in the multifunction display.
The HOLD function is activated. You can release the brake pedal.
If depressing the brake pedal the first time does not activate the HOLD function, wait briefly and then try again.
WARNING
The vehicle's brakes are applied when the
HOLD function is activated. For this reason,
deactivate the HOLD function if the vehicle is
to be set in motion by other means (e.g. in a
car wash or by towing).
Activation conditions
You can activate the HOLD function if: - the vehicle is stationary. - the engine is running. - the driver's door is closed or your seat belt is fastened. - the p ...Deactivating the HOLD function
The HOLD function is deactivated automatically if: - you accelerate and the transmission is in position D or R. - you shift the transmission to position P. - you apply t ...See also:
Outside mirrors
The outside mirror remote control will operate only when the ignition switch
is in the ACC or ON position.
Move the small switch (1) to select the right or left mirror. Adjust each mirror
to th ...
Introduction
Congratulations on selecting your new Chrysler GroupLLC vehicle. Be assured that
it represents precisionworkmanship, distinctive styling, and high quality - allessentials
that are traditional to o ...
Front Seat Cupholders
The cupholders in the center console will accommodate
either two large size cups or two 20 oz (.5 L) bottles or
cans. The one-peice insert can be easily removed for
cleaning. An optional removab ...