Buick LaCrosse: Adjusting the EQ (Equalizer) - Operation - Introduction - Infotainment System - Buick LaCrosse Owners ManualBuick LaCrosse: Adjusting the EQ (Equalizer)

For vehicles with an equalizer:

1. Press the TONE button.

1. Press the TONE button.

2. Select EQ.

3. Select the setting.

Press the back to the Tone Settings menu. BACK button to go back to the Tone Settings menu.

    Adjusting the Fader and Balance
    1. Press the TONE button. 2. Select Fader or Balance. 3. Select the value. Press the BACK button to go back to the Tone Settings menu. ...

    DSP (Digital Signal Processing) Settings
    For vehicles with DSP, it is used to provide a choice of different listening experiences. The DSP settings for the radio with CD are: • normal - Select this setting to adjust the audio for ...

    See also:

    Vacuum crankcase ventilation hoses
    Inspect the surface of hoses for evidence of heat and/or mechanical damage. Hard and brittle rubber, cracking, tears, cuts, abrasions, and excessive swelling indicate deterioration. Particular att ...

    ABS system self-check
    You may feel a slight shock in the brake pedal and hear the operating sound of ABS from the engine compartment just after the vehicle is started. This is caused by an automatic functional test of ...

    Trunk
    You can open the trunk in two ways: Pull up on the trunk release lever to the left of the driver’s seat. Press and hold the trunk release button on the remote transmitter. To close the trun ...